Sanding Sucks

It takes a lot of effort, and even more time. I’m really tempted to buy an electric sander to make my life easier.

(By the way, that’s not my hand, but it is the same sanding block I use)

I’m not against power tools, but they tend to create a lot more dust and noise than hand tools. This means that my ability to use them is even more limited; can’t use them at night, and I really need to empty my workspace of bathroom gear before starting work.

Although, the idea of making sanding easier is driving me to research power sanders:

Homemade Wood Polish and Sealant

image

I may still be practicing dovetails joints, and not yet ready to make any fancy, but I was curious and started looking into how to finish my eventual (amazing) work.

A lot of videos I watched mention sealing the wood with various types of oil, linseed oil being a common choice. I had no idea where to buy anyone, and I didn’t want a giant bottle of it anyway. Instead I found a rather handy blog post with a detailed how to about making a beeswax and olive oil polish and sealant. (Both items you can easily purchase at Wholefoods)

I won’t reiterate his steps here since he already wrote a great tutorial with pictures of each step. Instead here are two of my dovetail practice pieces before and after the finish was applied.

Check after the jump to see the test pieces.

Continue reading “Homemade Wood Polish and Sealant”

Dovetail Practice Log #1 – #9

Early on in my dovetail research I came across a reddit user who posted a log of his dovetail practice joints. Apparently it took him 38 tries to become proficient in the skill.

I liked the idea so I’ve been taking pictures of all of my work. I definitely need more practice, but I hope it won’t take me 38 tries.

Dovetail #1

image

I’m not sure if this one counts as a practice joint, but I did learn a valuable lesson; be sure to mark what is waste and needs to be cut out, and what should be left alone.

 

 

 

 

 

 

Continue reading “Dovetail Practice Log #1 – #9”

Marble Cutting Research

I bought a few pieces of scrap marble from a junk yard last weekend and I’ve been  playing with the idea of inlaying them into the wood coach arm coffee table I’m working on.

I still haven’t figured out the best way to do it but came across this video that reviewed some potential tools.

I’m currently thinking about getting the diamond cutting wheel for my Dremel, and one of the marble files. Before I do though I want to do a but more research.

If you have any thoughts let me know!

Dovetail Tools

imageOne thing about living is a small apartment is you lack space. Because of this whenever I start a new project I always have to think what tools do I absolutely need and which are just nice to have. There is almost always some expensive special tool that does one very specific task. It may be great at it, but that doesn’t mean you can’t do great work without it.

With that in mind, below is my list of tools that are required and which are nice to have when making dovetails.

Required

  • Dovetail saw – Technically you can get away with any saw, but having a dovetail saw with dramatically improve your work. It has a strong metal spine to keep the blade from flexing, and a high teeth per inch count that will make the cut much smoother.
  • Chisels – These are useful for many reasons, beyond just dovetails so you should probably have them anyway. For dovetails though they help you refine the tail and pins to get a perfect fit, and also remove the waste when cutting them. The chisels don’t have to be anything fancy, but you want a few sizes.
  • Knife – This is just a handy tool in general, but it’s needed for making the tails against the pin board.
  • Handplane – I’m still trying to get my head around all the different types of planes there are so I won’t recommend a specific type just yet. The pins and tails are never perfectly flush with the other board so the handplane is used to smooth everything out.
  • Mallet – Many tutorials and reviews call out having a specific dovetail mallet, or a wooden wallet, or something else as fancy. Really anything will work to tap the joint together, I use a rubber mallet. The only thing to avoid is a hammer since it might damage the wood (if that’s all you have put a towel between the hammer and wood and be gentle)

Nice to Haves

  • Marking gauge – I really debated whether this should be here or in the required section. The tool is used for marking one boards thickness on another. I’ve seen a few tutorials where the carpenter does this by placing on board on another, so I decided while really helpful it’s a nice to have.
  • Dovetail markers – Dovetails don’t actually have to be any specific angle or size, and if you really want a marker you can build on your self.
  • Coping saw – The coping saw is used to quickly remove the waste from the boards. This can also be done using just the chisels, which is how I started. That being said a coping saw will make the process much faster.
  • Square – Handy for transferring the marking lines from the end grain to the face.
  • Wing divider – This is the one tool I haven’t had to use yet, but a lot of tutorials reference it. It’s supposedly super handy to space out dovetail joints evenly. I’ll probably get one eventually, but I’m in no rush.

Although there are a lot of nice to haves, realistically most of those are pretty useful for other carpentry projects so you will acquire them at some point. 

Dovetail Resources / Tutorials

image

There are a lot of resources on the internet about how to
make dovetail joints. Below are a couple I found useful when starting of.

  • Hand Cut Dovetails:  I’m pretty fond of this dovetail walk through
    since it has a list of tools, and a pretty detailed description of what to do
    and not do.
  • How to Dovetail: Pretty good about explaining all of the
    different terminology: half pin, pin board, tail board etc. 

I recommend reading and watching these and many more. Although the basic steps are all the same each tutorial will have little pieces of advice that are very useful. (This was particularly true for me when I started working on my own joints.)

And sadly, the picture above is not my work. Hopefully one day my joints will look like that.

My “first” project

imageAs I mentioned in my last post I have always enjoyed working with my hands. I hadn’t done and true carpentry until recently though. 

What started all of this was a friend asked if I could build a sofa arm table for her. She lives in a tiny studio and doesn’t have space for a coffee table, but wanted a place to put a cup and book while on the couch (okay technically she still wants this… I’m just slow at building it).

Here’s the site she sent me with the idea.

I liked the idea, but the design bothered me, a lot. It isn’t an elegant design; It’s just three pieces of wood held together with some brackets, which causes gaps between the pieces, and just overall looks ugly to me.

After some thought I decided it would look great with some dovetail joints. The only problem is I had no idea how to make dovetail joints.

Four months later my friend still doesn’t have her table, but I’ve learned a lot and I think in another week or two I’ll be ready to give it a try.

Welcome to The City Carpenter

Welcome everyone!

I’ve always loved working with my hands and recently decided to get into woodworking. The challenge I have is I live in a small apartment in San Francisco. I don’t have access to a giant shop, large power tools, and I don’t even own a car to pick up materials. 

It was very frustrating to hear “this is really simple and quick, let’s head down to my 5,000 square foot shop with every tool ever and get this done” in pretty much every  tutorial I watched online.

That’s where this blog fits in. It’s going to chronicle what I learn and the challenges of woodworking in a city.